THE SLINGWING SET UP IS SIMPLE AND EASY! SAM LIGHT GIVES AN OVERVIEW OF THE KEY POINTS TO GET ANY WINGSURFER GOING.
- Inflate: Unclip all One-Pump valves. Open valve cover – Insert pump hose (sold separately) into inflation valve. Pump to 6 PSI. Clip off all One Pump valves. For higher winds inflate trailing edge to 12 – 14 PSI. Make sure One-Pump valves are clipped off.
- Attach: Feed wrist loop through the wing loop on LE. Pull wrist leash through itself to complete the connection.
- Control: Use Power Grip to control “wing tip roll”.
- Deflate – Unclip all One-Pump valves – Use the deflate valve.
- Store – While inflated, make sure it is tethered or weighted to prevent it from flying away. Do not leave in the hot sun as bladders may expand. While not in use. Make sure it’s dry before packing. Use the storage bag and keep it in a cool, dry place.
Hey. Sam Light here,
In this Wingsurfng – Slingwing video. I’m gonna give you quick start guide for how to set up your Slingwing, Including the inflation details. You need a generic pump with pressure gauge, and It also needs to have different nozzles on the end because you need two different styles. One for the Leading Edge and a separate one for the trailing edge of your wingsurfer.
GAUGE ON TOP OF THE PUMP
INTERCHANGEABLE NOZZLES. (USE LARGE FOR LEADING EDGE – SMALL FOR INFLATING THE TRAILING EDGE)
So let’s get started. Go ahead and take your Slingwing out of the bag and unroll it.
Make sure the Deflate Valve is closed off.
Now let’s insert the valve with the big hose connector to the LE of the Wing. Make sure your One-Pump clips are set unclipped. This will help inflate the trailing edge of your Slingwing.
Pump it up gauge reads six PSI and no more. So that is 6 PSI. And then if you want to you can increase the trailing edge. (increases stability in higher winds eliminates the wing from turning into a Taco in the gust) Make sure to clip off your One-Pump Valves. Hook up training edge HP Valves using your other hose tip. You can actually pump the trailing edge up to 14 PSI.
It’s that simple. Hook up your leash, and your Slingwing is ready to go Wingsurfer.